A renderer for 2d visualisation of point clouds which shows the dataset's extents using a fill symbol. More...

#include <qgspointcloudextentrenderer.h>

Inheritance diagram for QgsPointCloudExtentRenderer:

Public Member Functions
	QgsPointCloudExtentRenderer (QgsFillSymbol *symbol=nullptr)
	Constructor for QgsPointCloudExtentRenderer.

	~QgsPointCloudExtentRenderer () override

QgsPointCloudRenderer *	clone () const override
	Create a deep copy of this renderer.

QList< QgsLayerTreeModelLegendNode * >	createLegendNodes (QgsLayerTreeLayer *nodeLayer) override
	Creates a set of legend nodes representing the renderer.

QgsFillSymbol *	fillSymbol () const
	Returns the symbol used to render the cloud's extent.

void	renderBlock (const QgsPointCloudBlock *block, QgsPointCloudRenderContext &context) override
	Renders a block of point cloud data using the specified render context.

void	renderExtent (const QgsGeometry &extent, QgsPointCloudRenderContext &context)
	Renders a polygon extent geometry to the specified render context.

QDomElement	save (QDomDocument &doc, const QgsReadWriteContext &context) const override
	Saves the renderer configuration to an XML element.

void	setFillSymbol (QgsFillSymbol *symbol)
	Sets the symbol used to render the cloud's extent.

void	startRender (QgsPointCloudRenderContext &context) override
	Must be called when a new render cycle is started.

void	stopRender (QgsPointCloudRenderContext &context) override
	Must be called when a render cycle has finished, to allow the renderer to clean up.

QString	type () const override
	Returns the identifier of the renderer type.

Public Member Functions inherited from QgsPointCloudRenderer
	QgsPointCloudRenderer ()=default

	QgsPointCloudRenderer (const QgsPointCloudRenderer &other)=delete
	QgsPointCloudRenderer cannot be copied – use clone() instead.

virtual	~QgsPointCloudRenderer ()=default

virtual void	checkLegendItem (const QString &key, bool state=true)
	Called when the check state of the legend item with the specified key is changed.

Qgis::PointCloudDrawOrder	drawOrder2d () const
	Returns the drawing order used by the renderer for drawing points.

bool	horizontalTriangleFilter () const
	Returns whether large triangles will get rendered.

double	horizontalTriangleFilterThreshold () const
	Returns threshold for filtering of triangles.

Qgis::RenderUnit	horizontalTriangleFilterUnit () const
	Returns units of the threshold for filtering of triangles.

QVector< QVariantMap >	identify (QgsPointCloudLayer *layer, const QgsRenderContext &context, const QgsGeometry &geometry, double toleranceForPointIdentification=0)
	Returns the list of visible points of the point cloud layer layer and an extent defined by a geometry in the 2D plane geometry.

virtual bool	legendItemChecked (const QString &key)
	Returns `true` if the legend item with the specified key is checked.

virtual QStringList	legendRuleKeys () const
	Returns a list of all rule keys for legend nodes created by the renderer.

double	maximumScreenError () const
	Returns the maximum screen error allowed when rendering the point cloud.

Qgis::RenderUnit	maximumScreenErrorUnit () const
	Returns the unit for the maximum screen error allowed when rendering the point cloud.

QgsPointCloudRenderer &	operator= (const QgsPointCloudRenderer &other)=delete
	QgsPointCloudRenderer cannot be copied – use clone() instead.

double	pointSize () const
	Returns the point size.

const QgsMapUnitScale &	pointSizeMapUnitScale () const
	Returns the map unit scale used for the point size.

Qgis::RenderUnit	pointSizeUnit () const
	Returns the units used for the point size.

Qgis::PointCloudSymbol	pointSymbol () const
	Returns the symbol used by the renderer for drawing points.

virtual std::unique_ptr< QgsPreparedPointCloudRendererData >	prepare ()
	Returns prepared data container for bulk point color retrieval.

bool	renderAsTriangles () const
	Returns whether points are triangulated to render solid surface.

void	setDrawOrder2d (Qgis::PointCloudDrawOrder order)
	Sets the drawing order used by the renderer for drawing points.

void	setHorizontalTriangleFilter (bool enabled)
	Sets whether large triangles will get rendered.

void	setHorizontalTriangleFilterThreshold (double threshold)
	Sets threshold for filtering of triangles.

void	setHorizontalTriangleFilterUnit (Qgis::RenderUnit unit)
	Sets units of the threshold for filtering of triangles.

void	setMaximumScreenError (double error)
	Sets the maximum screen error allowed when rendering the point cloud.

void	setMaximumScreenErrorUnit (Qgis::RenderUnit unit)
	Sets the unit for the maximum screen error allowed when rendering the point cloud.

void	setPointSize (double size)
	Sets the point size.

void	setPointSizeMapUnitScale (const QgsMapUnitScale &scale)
	Sets the map unit scale used for the point size.

void	setPointSizeUnit (const Qgis::RenderUnit units)
	Sets the units used for the point size.

void	setPointSymbol (Qgis::PointCloudSymbol symbol)
	Sets the symbol used by the renderer for drawing points.

void	setRenderAsTriangles (bool asTriangles)
	Sets whether points are triangulated to render solid surface.

virtual QSet< QString >	usedAttributes (const QgsPointCloudRenderContext &context) const
	Returns a list of attributes required by this renderer.

virtual bool	willRenderPoint (const QMap< QString, QVariant > &pointAttributes)
	Checks whether the point holding pointAttributes attributes will be rendered By default if not overridden in the subclass renderer will return true ( the renderer is responsible for the filtering behavior )

Static Public Member Functions
static QgsPointCloudRenderer *	create (QDomElement &element, const QgsReadWriteContext &context)
	Creates an extent renderer from an XML element.

static QgsFillSymbol *	defaultFillSymbol ()
	Returns a new instance of the default fill symbol to use for showing point cloud extents.

Static Public Member Functions inherited from QgsPointCloudRenderer
static QgsPointCloudRenderer *	load (QDomElement &element, const QgsReadWriteContext &context)
	Creates a renderer from an XML element.

Additional Inherited Members
Protected Member Functions inherited from QgsPointCloudRenderer
void	addPointToTriangulation (double x, double y, double z, const QColor &color, QgsPointCloudRenderContext &context)
	Adds a point to the list of points to be triangulated (only used when renderAsTriangles() is enabled)

void	copyCommonProperties (QgsPointCloudRenderer *destination) const
	Copies common point cloud properties (such as point size and screen error) to the destination renderer.

void	drawPoint (double x, double y, const QColor &color, int width, QgsPointCloudRenderContext &context) const
	Draws a point using a color and painter width at the specified x and y (in map coordinates).

void	drawPoint (double x, double y, const QColor &color, QgsPointCloudRenderContext &context) const
	Draws a point using a color at the specified x and y (in map coordinates).

void	drawPointToElevationMap (double x, double y, double z, int width, QgsPointCloudRenderContext &context) const
	Draws a point at the elevation z using at the specified x and y (in map coordinates) and painter width on the elevation map.

void	drawPointToElevationMap (double x, double y, double z, QgsPointCloudRenderContext &context) const
	Draws a point at the elevation z using at the specified x and y (in map coordinates) on the elevation map.

void	restoreCommonProperties (const QDomElement &element, const QgsReadWriteContext &context)
	Restores common renderer properties (such as point size and screen error) from the specified DOM element.

void	saveCommonProperties (QDomElement &element, const QgsReadWriteContext &context) const
	Saves common renderer properties (such as point size and screen error) to the specified DOM element.

Static Protected Member Functions inherited from QgsPointCloudRenderer
static void	pointXY (QgsPointCloudRenderContext &context, const char *ptr, int i, double &x, double &y)
	Retrieves the x and y coordinate for the point at index i.

static double	pointZ (QgsPointCloudRenderContext &context, const char *ptr, int i)
	Retrieves the z value for the point at index i.

Detailed Description

A renderer for 2d visualisation of point clouds which shows the dataset's extents using a fill symbol.

Since: QGIS 3.18

Definition at line 33 of file qgspointcloudextentrenderer.h.

Constructor & Destructor Documentation

◆ QgsPointCloudExtentRenderer()

QgsPointCloudExtentRenderer::QgsPointCloudExtentRenderer ( QgsFillSymbol * symbol = nullptr )

Constructor for QgsPointCloudExtentRenderer.

Optionally the symbol to use for showing the extent can be specified. If specified, ownership is transferred to the renderer. If no symbol is specified a default one will be created instead.

Definition at line 28 of file qgspointcloudextentrenderer.cpp.

◆ ~QgsPointCloudExtentRenderer()

QgsPointCloudExtentRenderer::~QgsPointCloudExtentRenderer ( )

overridedefault

Member Function Documentation

◆ clone()

QgsPointCloudRenderer * QgsPointCloudExtentRenderer::clone ( ) const

overridevirtual

Create a deep copy of this renderer.

Should be implemented by all subclasses and generate a proper subclass.

Implements QgsPointCloudRenderer.

Definition at line 41 of file qgspointcloudextentrenderer.cpp.

◆ create()

QgsPointCloudRenderer * QgsPointCloudExtentRenderer::create	(	QDomElement &	element,
		const QgsReadWriteContext &	context
	)

static

Creates an extent renderer from an XML element.

Definition at line 53 of file qgspointcloudextentrenderer.cpp.

◆ createLegendNodes()

QList< QgsLayerTreeModelLegendNode * > QgsPointCloudExtentRenderer::createLegendNodes ( QgsLayerTreeLayer * nodeLayer )

overridevirtual

Creates a set of legend nodes representing the renderer.

Reimplemented from QgsPointCloudRenderer.

Definition at line 163 of file qgspointcloudextentrenderer.cpp.

◆ defaultFillSymbol()

QgsFillSymbol * QgsPointCloudExtentRenderer::defaultFillSymbol ( )

static

Returns a new instance of the default fill symbol to use for showing point cloud extents.

Definition at line 118 of file qgspointcloudextentrenderer.cpp.

◆ fillSymbol()

QgsFillSymbol * QgsPointCloudExtentRenderer::fillSymbol ( ) const

Returns the symbol used to render the cloud's extent.

See also: setFillSymbol()

Definition at line 128 of file qgspointcloudextentrenderer.cpp.

◆ renderBlock()

void QgsPointCloudExtentRenderer::renderBlock	(	const QgsPointCloudBlock *	block,
		QgsPointCloudRenderContext &	context
	)

overridevirtual

Renders a block of point cloud data using the specified render context.

Implements QgsPointCloudRenderer.

Definition at line 48 of file qgspointcloudextentrenderer.cpp.

◆ renderExtent()

void QgsPointCloudExtentRenderer::renderExtent	(	const QgsGeometry &	extent,
		QgsPointCloudRenderContext &	context
	)

Renders a polygon extent geometry to the specified render context.

Definition at line 67 of file qgspointcloudextentrenderer.cpp.

◆ save()

QDomElement QgsPointCloudExtentRenderer::save	(	QDomDocument &	doc,
		const QgsReadWriteContext &	context
	)		const

overridevirtual

Saves the renderer configuration to an XML element.

See also: load()

Implements QgsPointCloudRenderer.

Definition at line 138 of file qgspointcloudextentrenderer.cpp.

◆ setFillSymbol()

void QgsPointCloudExtentRenderer::setFillSymbol ( QgsFillSymbol * symbol )

Sets the symbol used to render the cloud's extent.

Ownership of symbol is transferred to the renderer.

See also: fillSymbol()

Definition at line 133 of file qgspointcloudextentrenderer.cpp.

◆ startRender()

void QgsPointCloudExtentRenderer::startRender ( QgsPointCloudRenderContext & context )

overridevirtual

Must be called when a new render cycle is started.

A call to startRender() must always be followed by a corresponding call to stopRender() after all features have been rendered.

See also: stopRender()

Warning: This method is not thread safe. Before calling startRender() in a non-main thread, the renderer should instead be cloned and startRender()/stopRender() called on the clone.

Reimplemented from QgsPointCloudRenderer.

Definition at line 151 of file qgspointcloudextentrenderer.cpp.

◆ stopRender()

void QgsPointCloudExtentRenderer::stopRender ( QgsPointCloudRenderContext & context )

overridevirtual

Must be called when a render cycle has finished, to allow the renderer to clean up.

Calls to stopRender() must always be preceded by a call to startRender().

Warning: This method is not thread safe. Before calling startRender() in a non-main thread, the renderer should instead be cloned and startRender()/stopRender() called on the clone.

See also: startRender()

Reimplemented from QgsPointCloudRenderer.

Definition at line 157 of file qgspointcloudextentrenderer.cpp.

◆ type()

QString QgsPointCloudExtentRenderer::type ( ) const

overridevirtual

Returns the identifier of the renderer type.

Implements QgsPointCloudRenderer.

Definition at line 36 of file qgspointcloudextentrenderer.cpp.

The documentation for this class was generated from the following files:

/build/qgis-3.41.0+git20241119+45a0abf3bec+99sid/src/core/pointcloud/qgspointcloudextentrenderer.h
/build/qgis-3.41.0+git20241119+45a0abf3bec+99sid/src/core/pointcloud/qgspointcloudextentrenderer.cpp

Public Member Functions

Static Public Member Functions

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ QgsPointCloudExtentRenderer()

◆ ~QgsPointCloudExtentRenderer()

Member Function Documentation

◆ clone()

◆ create()

◆ createLegendNodes()

◆ defaultFillSymbol()

◆ fillSymbol()

◆ renderBlock()

◆ renderExtent()

◆ save()

◆ setFillSymbol()

◆ startRender()

◆ stopRender()

◆ type()