<put algorithm description here>
DEM
[raster]Streams
[raster]Method
[selection]<put parameter description here>
Options:
Default: 0
Epsilon
[number]<put parameter description here>
Default: 1.0
Processed DEM
[raster]processing.runalg('saga:burnstreamnetworkintodem', dem, stream, method, epsilon, burn)
<put algorithm description here>
Elevation
[raster]Sink Routes
[raster]Optional.
<put parameter description here>
Weight
[raster]Optional.
<put parameter description here>
Material
[raster]Optional.
<put parameter description here>
Target
[raster]Optional.
<put parameter description here>
Step
[number]<put parameter description here>
Default: 1
Method
[selection]<put parameter description here>
Options:
Default: 0
DEMON - Min. DQV
[number]<put parameter description here>
Default: 0.0
Flow Correction
[boolean]<put parameter description here>
Default: True
Catchment Area
[raster]Catchment Height
[raster]Catchment Slope
[raster]Total accumulated Material
[raster]Accumulated Material from _left_ side
[raster]Accumulated Material from _right_ side
[raster]processing.runalg('saga:catchmentareaflowtracing', elevation, sinkroute, weight, material, target, step, method, mindqv, correct, carea, cheight, cslope, accu_tot, accu_left, accu_right)
<put algorithm description here>
Elevation
[raster]Sink Routes
[raster]Optional.
<put parameter description here>
Weight
[raster]Optional.
<put parameter description here>
Material
[raster]Optional.
<put parameter description here>
Target
[raster]Optional.
<put parameter description here>
Step
[number]<put parameter description here>
Default: 1
Target Areas
[raster]Optional.
<put parameter description here>
Method
[selection]<put parameter description here>
Options:
Default: 0
Convergence
[number]<put parameter description here>
Default: 1.1
Catchment Area
[raster]Catchment Height
[raster]Catchment Slope
[raster]Total accumulated Material
[raster]Accumulated Material from _left_ side
[raster]Accumulated Material from _right_ side
[raster]Flow Path Length
[raster]processing.runalg('saga:catchmentarearecursive', elevation, sinkroute, weight, material, target, step, targets, method, convergence, carea, cheight, cslope, accu_tot, accu_left, accu_right, flowlen)
<put algorithm description here>
Elevation
[raster]Method
[selection]<put parameter description here>
Options:
Default: 0
Catchment Area
[raster]processing.runalg('saga:catchmentarea', elevation, method, carea)
<put algorithm description here>
Elevation
[raster]Parameter
[raster]Optional.
<put parameter description here>
Default Weight
[number]<put parameter description here>
Default: 1.0
Method
[selection]<put parameter description here>
Options:
Default: 0
Cell Balance
[raster]processing.runalg('saga:cellbalance', dem, weights, weight, method, balance)
<put algorithm description here>
Elevation
[raster]Edge Contamination
[raster]processing.runalg('saga:edgecontamination', dem, contamination)
<put algorithm description here>
DEM
[raster]Minimum Slope [Degree]
[number]<put parameter description here>
Default: 0.01
Filled DEM
[raster]processing.runalg('saga:fillsinks', dem, minslope, result)
<put algorithm description here>
DEM
[raster]Minimum Slope [Degree]
[number]<put parameter description here>
Default: 0.01
Filled DEM
[raster]Flow Directions
[raster]Watershed Basins
[raster]processing.runalg('saga:fillsinkswangliu', elev, minslope, filled, fdir, wshed)
<put algorithm description here>
DEM
[raster]Minimum Slope [Degree]
[number]<put parameter description here>
Default: 0.01
Filled DEM
[raster]processing.runalg('saga:fillsinksxxlwangliu', elev, minslope, filled)
<put algorithm description here>
DEM
[raster]Flat Area Values
[selection]<put parameter description here>
Options:
Default: 0
No Flats
[raster]Flat Areas
[raster]processing.runalg('saga:flatdetection', dem, flat_output, noflats, flats)
<put algorithm description here>
Elevation
[raster]Seeds
[raster]Optional.
<put parameter description here>
Seeds Only
[boolean]<put parameter description here>
Default: True
Flow Routing Algorithm
[selection]<put parameter description here>
Options:
Default: 0
Convergence (FD8)
[number]<put parameter description here>
Default: 1.1
Flow Path Length
[raster]processing.runalg('saga:flowpathlength', elevation, seed, seeds_only, method, convergence, length)
<put algorithm description here>
Elevation
[raster]Total Catchment Area (TCA)
[raster]Optional.
<put parameter description here>
Method
[selection]<put parameter description here>
Options:
Default: 0
Flow Width
[raster]Specific Catchment Area (SCA)
[raster]processing.runalg('saga:flowwidthandspecificcatchmentarea', dem, tca, method, width, sca)
<put algorithm description here>
DEM
[raster]Seeds
[raster]Absolute Water Levels
[boolean]<put parameter description here>
Default: True
Lake
[raster]Surface
[raster]processing.runalg('saga:lakeflood', elev, seeds, level, outdepth, outlevel)
<put algorithm description here>
Slope
[raster]Catchment Area
[raster]Area to Length Conversion
[selection]<put parameter description here>
Options:
Default: 0
Method (LS)
[selection]<put parameter description here>
Options:
Default: 0
Rill/Interrill Erosivity
[number]<put parameter description here>
Default: 0.0
Stability
[selection]<put parameter description here>
Options:
Default: 0
LS Factor
[raster]processing.runalg('saga:lsfactor', slope, area, conv, method, erosivity, stability, ls)
<put algorithm description here>
Elevation
[raster]t
[number]<put parameter description here>
Default: 10
Catchment area
[raster]Catchment slope
[raster]Modified catchment area
[raster]Wetness index
[raster]processing.runalg('saga:sagawetnessindex', dem, t, c, gn, cs, sb)
<put algorithm description here>
Elevation
[raster]Threshold
[boolean]<put parameter description here>
Default: True
Threshold Height
[number]<put parameter description here>
Default: 100.0
Sink Route
[raster]processing.runalg('saga:sinkdrainageroutedetection', elevation, threshold, thrsheight, sinkroute)
<put algorithm description here>
DEM
[raster]Sink Route
[raster]Optional.
<put parameter description here>
Method
[selection]<put parameter description here>
Options:
Default: 0
Threshold
[boolean]<put parameter description here>
Default: True
Threshold Height
[number]<put parameter description here>
Default: 100.0
Preprocessed DEM
[raster]processing.runalg('saga:sinkremoval', dem, sinkroute, method, threshold, thrsheight, dem_preproc)
<put algorithm description here>
Elevation
[raster]Slope Length
[raster]processing.runalg('saga:slopelength', dem, length)
<put algorithm description here>
Slope
[raster]Catchment Area
[raster]Area Conversion
[selection]<put parameter description here>
Options:
Default: 0
Stream Power Index
[raster]processing.runalg('saga:streampowerindex', slope, area, conv, spi)
<put algorithm description here>
Slope
[raster]Catchment Area
[raster]Transmissivity
[raster]Optional.
<put parameter description here>
Area Conversion
[selection]<put parameter description here>
Options:
Default: 0
Method (TWI)
[selection]<put parameter description here>
Options:
Default: 0
Topographic Wetness Index
[raster]processing.runalg('saga:topographicwetnessindextwi', slope, area, trans, conv, method, twi)
<put algorithm description here>
Target Area
[raster]Optional.
<put parameter description here>
Target X coordinate
[number]<put parameter description here>
Default: 0.0
Target Y coordinate
[number]<put parameter description here>
Default: 0.0
Elevation
[raster]Sink Routes
[raster]Optional.
<put parameter description here>
Method
[selection]<put parameter description here>
Options:
Default: 0
Convergence
[number]<put parameter description here>
Default: 1.1
Upslope Area
[raster]processing.runalg('saga:upslopearea', target, target_pt_x, target_pt_y, elevation, sinkroute, method, converge, area)